If you want to get racing drone parts to build a fast drone, start with our recommended racing drone frames.
It’s very common for a drone enthusiast who likes to race to simply buy the racing drone parts they need to make their drone super fast.
They will have to first pick the racing frame to which they can then attach their racing drone parts.
These racing drone frames are built for a specific purpose: to enable the drone to go faster and win the race. No kidding.
First Priority
Of all the racing drone parts you’ll need to consider, the racing drone frame should be the first priority.
The best racing quadcopter frame is typically lightweight, and it will have to be extremely aerodynamic.
That means these racing drone frames need to be compact and thin.
FPV Cameras
The question of speed has led to debates about including FPV cameras among the racing drone parts you need to get.
These FPV cameras do make your racing experience better and you can use the videos for boasting on social media. They also make the drone more versatile.
Still, you may have to consider getting the best FPV racing frame with the appropriate FPV drone parts to make it work.
Risk of Damage
Lots of people also buy racing drone parts because they tend to get damaged too frequently. That’s part of the risk of drone racing.
Sometimes accidents happen when things go fast. You don’t even need to watch real car races to know this.
Take a look at those nitro-powered cars or even remote control jets like the one below and you’ll see how things can go wrong even when you’re not in a race.
Durability
If you don’t want to spend too much money on buying replacement racing drone parts, you will need to focus on durability too. This also applies to racing drone frames.
The main issue here, though, is that the more durable drone parts are often heavier, so they may not be good enough to qualify as racing drone parts.
So you will need to balance these two factors.
Different Opinions
Go online, and there will be lots of discussions on frame shapes and arm layouts.
Each one will have their own proponents online.
In fact, the entire topic of building a racing drone is so mired in details that even the placement of the lipo battery is discussed.
Finally, you should expect that building with racing drone frames can be rather complicated.
Not good news for a newbie.
You may need to first get some experience in building with a freestyle quadcopter frame and FPV drone parts.
You may not win a race with a build like this, but you’ll get the experience you need to build better with racing drone parts in the future.
This post, it’s photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.
RACING DRONE PARTS | PICTURE | QUALITY | HOW IT LOOKS | POPULARITY | PRICE | OUR OVERALL RATING |
---|---|---|---|---|---|---|
Readytosky Martian II | ![]() ![]() | 4 | 4 | 5 | $$ | 4.3 |
usmile Carbon Fiber Quadcopter Frame | ![]() ![]() | 4 | 4 | 4 | $$ | 4 |
Readytosky 235mm FPV Racing Drone Frame | ![]() ![]() | 4 | 5 | 4 | $$ | 4.3 |
FPV Drone 222mm FPV Racing Drone | ![]() ![]() | 4 | 4 | 3 | $$ | 3.6 |
iFlight XL5 V2 226mm FPV Frame | ![]() ![]() | 4 | 4 | 3 | $$$ | 3.6 |
1. Readytosky Martian II
Many consider this a prime candidate for the best racing drone frame.
That’s because it’s cheap, yet its quality is quite good. It performs much better than you’d expect.
It’s available in a kit that includes crucial parts and sometimes even handy tools.
Here’s a look at some of its key features.
The airframe is made of full 3K carbon fiber. We’re talking about a type of carbon fiber weave that’s lightweight and strong, which is why they’re often used to build racing bicycles.
This also has a solid 4mm FPV frame, and it’s removable. If you’re getting the kit, you also get the arms for the frame.
The plate is 1.5mm thick and the whole thing weighs about 145g.
This racing quad frame doesn’t dictate the motor you need to use. It has many motor mounting holes so you can fit in a variety of motors.
So it’s actually very versatile. Nice.
Also, the kit offers custom aluminium hardware that allows you to use a single tool to quickly swap the arms in race pit settings. Convenient, don’t you think?
The frame also allows you easy access to the lipo battery so you can make quick replacements when your drone battery is out of juice.
Also, this works as an FPV racing frame with a camera, and it supports the use of the HS1177 as well as 32mm board cams. You can also outfit this with an HD camera like a GoPro 4.
Pros
- As we’ve said, it’s relatively inexpensive. However, we did make sure that this whole list of racing drones frames are all very affordable.
- The flight controls and characteristics are very predictable, which is a good thing if you want to race your drone.
- It offers you options on which motors and FPV drone parts to get.
- It’s durable, as it should withstand a few crashes now and again.
- It’s also easy to build, which is why it’s great for newbies.
Cons
- Some people have mentioned the rather lackadaisical approach to packaging and shipping by some sellers. There are stories about missing parts or damaged arms when you buy a kit.
- There are also those who think the bottom plate is a bit weak.
- It may be easy to build, but you can’t rely on the instruction diagram.
Your best bet is to go on YouTube to watch how it’s done.


“A Dependable Drone Frame for Newbies”
OOR: 4.3
2. usmile Carbon Fiber Quadcopter Frame
If you want a racing frame that is tough, really tough, you may want to go with this usmile Quadcopter frame.
While it doesn’t come as a kit, many sellers offer links to the racing drone parts you may need with it.
For this frame, both the 1806 and the 2204 motors are recommended. It’s also suggested that you get propellers that measure 4 or 5 inches.
As you only get the frame, its price is rather low. But its features do not suggest that it’s “cheap”.
Its unibody design features a 1.5mm top plate while it has 4mm thick carbon fiber for the bottom plate.
Because of its unibody design, the assembly is easier and you have a reduced weight because you don’t have extra hardware like bolts and screws.
Pretty nice huh? You beat and lets not forget that the weight makes all the difference when it comes to racing drones.
It also features the X frame design, which is supposedly able to reduce air resistance much better. It also offers greater control over the racing drone.
So X is for eXtraordinary I guess.
And the whole thing only weighs 130g.
Also, for your information, the lipo battery is mounted at the top.
So all up this can definitely work as a great FPV racing drone frame, though it may take some work on your part.
Pros
- The first advantage that must be mentioned is its famed durability. This thing is tough. Plenty of customer reviews mention crashes and how this sturdy little frame has survived them all.
- The setup is rather easy on the whole if you have some experience.
- It doesn’t have sharp edges or burrs.
- It can be fitted with a camera.
- It’s very slim, so it’s great for racing.
Cons
- The compact size makes it rather challenging to put in the racing drone parts. You may want to first plan it out. In addition, you may want to get smaller drone parts to make them fit better.
- Yes, it can fit a camera inside. But the standoffs in the front can make putting in the camera rather difficult, and you won’t be able to control the tilt.
- If you’re like most folks, you won’t get instructions on how to assemble your frame and drone parts. So you need to go online—just go to YouTube and you’ll be fine.
- If you break an arm on this thing, you’ll need to replace the entire bottom plate because of the unibody design.


“Tough as a Tank”
OOR: 4
3. Readytosky 235mm FPV Racing Drone Frame
If you’re not careful, you may end up building a custom-built racing drone that looks like most of the other drones in the race.
You don’t want that right? You want originality for your drone.
That’s the trouble when people buy from the same sellers.
But with the Readytosky 235mm FPV Racing Drone Frame, you certainly can use stickers to personalize your drone.
Decorate it to your heart’s content.
Your package even contains a sticker sheet, along with a 20cm Lipo battery strap.
Aside from the looks, here are some features you need to know about.
This uses the usual full 3K carbon fiber material. It is both extremely strong and yet lightweight enough for racing.
It features a true-X frame for speed and control. This type of frame is especially suited for FPV racing, though the FPV drone parts may be stacked up in the middle due to the compact space.
The battery design mounts the battery at the top, which offers better balance. If you take a rest from racing and go for freestyle flying, this configuration also gives you better control.
Also, you can just press the nuts to remove the arms quickly. It’ll be a breeze.
It also has a built-in GoPro mount system and supports 20mm and 30mm bolt pattern so you can use a wide range of flight controllers.
The spiral design for the interlocking arms is quite unique, and it offers greater support and better flight stability.
The arms also have spikes to protect the motor in case of a crash.
One last thing: It only weighs 117.4g.
Pros
- This works for both newbies and seasoned drone racers. As its design is quite compact, you don’t have too many components to worry about so the assembly should be quick.
- It’s extremely lightweight.
- You can personalize the frame with unique skins.
- You can fit in a GoPro easily enough with its built-in mount system.
- It’s very stable when you fly it.
- It even comes with instructions that you can understand, though YouTube is always a nice backup for assembly video tutorials.
Cons
- The frame may be strong, but the arms that come with the package can be a bit brittle.
- Your package may also include 14mm screws to mount the flight controller, but 16mm or 18mm screws work better.
- Some accuse it of being a clone of the more expensive Skitzo frame.


“Solid Flight with a Unique Look”
OOR: 4.3
4. FPV Drone 222mm FPV Racing Drone
Here is another racing drone frame that checks in with many of the features you want, and even a few you wished for but couldn’t get with other frames.
It’s another affordable frame, and yes, the brand is somewhat generic.
Yet its value for money is quite impressive.
Like other good racing drone frames on this list, this uses full 3K carbon fiber for the airframe, with a thickness measuring 4mm for the main plate.
The frame has a stretch-X design for the arms. This is designed to provide terrific handling for high speeds going forward, and it also enables fast snap rolls.
That means you can not just race, but also race with style.
The screws for the frame are made of premium black oxide steel.
Also, there’s a chamfered edge on the top and bottom of the main plate and the top plate. This eliminates any sharp edges which can cut through wires and straps, and it gives you a great aesthetic look.
It also has black anodized spacers for easy grip.
There are bumper features at the end of the arms, which protect the motor if you should crash the drone. Which let’s face it is likely to happen when racing.
There’s also a protection plate for the lipo battery, so this drone is never short of safety features.
The camera mounting solution on the frame accommodates FPV and HD cameras. An HD camera like the GoPro 4 can be set at a 35-degree angle.
If you’re looking for drone parts, go with the 1806-2206 brushless motor, the Mini CC3D or the Naze32 flight controller, and 5030, 5040, or 5045 propellers.
Pros
- It’s extremely durable, and quite a few customers report how the frame has survived a fall from hundreds of feet in the air.
- The frame is also quite lightweight, with rounded edges.
- Its look is actually quite appealing.
- It can be handled very well even at high speeds.
- Many customers have noted that the FPVDrone customer support is actually quite good.
- Its 4mm arms are strong and reduce vibration when flying.
Cons
- It’s a tight build for the drone parts, so you need to plan where each component goes.
- Some people have difficulty fitting in their Runcam Swift 2. You may have to use a Dremel.
- The PDB (power distribution board) works well enough, but for racing you may want to upgrade it. At least it’s removable.


“Great Looks and Great Quality”
OOR: 3.6
5. iFlight XL5 V2 226mm FPV Frame
It’s supposed to be a freestyle frame, but this iFlight works well enough for newbies to racing drone builds.
This allows for excellent control over its weight distribution, so you’re able to make sure it’s stable and handles properly.
It may be the most expensive frame on this list, but it’s only for a few dollars more than the others.
Just like the others, this also uses full 3K carbon fiber and the screws are rated for high strength, and they’re nickel-plated.
Good thing to know that the 4mm arms and plates are replaceable.
This updated version comes with a hole for the FPV antenna, 30mm standoffs, 2 extra standoffs for a more solid body, longer top and bottom plates, and more space for the receiver or battery.
Also, the battery is top-mounted, which seems to be the trend at the moment.
If you like, you can mount it on the bottom as well.
The frame has a true-X design. This means the arms are shortened so the weight is centralized.
It results in snappier flight characteristics making it well suited for FPV racing.
Moreover, it only weighs 101.2g!
Recommended drone parts for this include the RevoBeeF4 Compatible controller, the iPower the force 2204 – 2306 Motor, T5040C 5-inch propellers, FPV cameras like the RunCam Swift or the Foxeer Camera with 2.1/2.5/2.8 wide angle lens, and the 600mW48Ch Transmitter.
Pros
- The edges in the arms are very smooth.
- The fitting here is quite nice and the holes line up well.
- It offers a low profile.
- You may be able to mount the battery at the bottom if you want.
- It looks mean and tough.
Cons
- It may be a touch too small, as some people find it hard to fit in both the battery and the GoPro.
- Some have complained that the arms broke easily, though others say the arms did just fine after a crash. You may have to take your chances, but that’s normal for racing drones.
- It’s a bit on the pricey side (though not by much).
“A Tougher New Version”
OOR: 3.6
Conclusion on the Racing Drone Parts
When you’re trying to build a freestyle drone, you probably have to prioritize its ability to withstand crashes, and also how easy it is to build and repair.
Just like with any remote control plane or speedy rc car as well, these factors are important for racing (especially crash resistance), but you also need to factor in the weight.
Simply put, the lighter you get, the faster you go.
Yet you also need to address the inevitability of crashes.
The Dilemma
Crashes may not be too common when you’re racing streamlined remote control boats or even newer rc helicopters.
However, these things happen more frequently with racing drones. This means durability is crucial, yet for that you need more weight—which slows things down.
It is quite a dilemma.
This is the challenge you face when you’re building a drone for racing. You need to figure out the weight that gives you the fastest speed while also offering acceptable durability.
FPV Camera Mounting
Of course, your FPV camera mounting should also be considered, since it’s often an integral part of your racing drone experience.
Your camera should be able to get the right tilt, while the frame should be able to support the camera size you’re planning to use.
The use of HD cameras may not be worth it, as they may weigh too much for your frame.
In the end, the choice is up to you.
Actually, making these decisions regarding the racing drone parts is part of the fun when it comes to drone racing! And at least with our list, you won’t have to spend too much to get a great racing drone frame.
Leave a Reply